Welcome to DLI Training. Victoria’s first choice for Workplace…

 

Design Learning Inspection (DLI Training) are a Registered Training Organisation (RTO) in Victoria. DLI Training will come to you and do all their training on Your Premises using Your Equipment – that results in, less production down-time and more effective training as your employees will learn on-site and with the equipment they will be working with.

DLI Training includes certificate courses for:

DLI Training is a Registered Training Organisation (RTO) in Victoria.

Verification Of Competence (V.O.C)

Employers have a Duty of Care to ensure employees have not only undertaken adequate initial training and where appropriate hold the relevant Unit of Competency but receive refresher training and are deemed competent to operate the plant and equipment they are operating.

Likewise, Principal Contractors must satisfy themselves that any operators working on their sites whether directly employed, supplied by an agency or sub-contract are competent to operate the machine they are driving.

Design Learning Inspection can deliver Verifications of Competence on your behalf on a wide range of machines including but not limited to the following:

  • Forklift
  • Elevated Work Platform
  • Excavator
  • Mobile Crane
  • Vehicle Loading Crane

For more information or bookings – Phone Alan on 0488 999 670.

RIIWHS202D – Enter and Work in Confined Spaces

Performance Evidence

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

  • locates and applies relevant documentation, policies and procedures
  • demonstrates completion of entering and working in confined spaces that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
    • obtain appropriate entry permit and instructions for performing work in confined space
    • interpreting and applying safe work method statements
    • apply tagging and lock out
    • selecting, wearing and caring for personal protective equipment applicable to all tasks and environment identified
    • entering the confined space
    • using atmospheric monitoring devices prior to entering the confined space
    • working in the confined space
    • using atmospheric monitoring devices during confined space activity
    • applying safe materials handling methods
    • exiting the confined space
    • remove tagging and lock out

Knowledge Evidence

The candidate must demonstrate knowledge of enter and work in confined spaces through:

  • identifying areas that constitute confined spaces
  • complying with site and equipment safety requirements
  • complying with the entry and exit procedures, risks and regulations
  • types of air contaminants and toxic gases
  • identifying the limitations of breathing apparatus
  • identifying equipment types, characteristics, technical capabilities and limitations
  • complying with site isolation and site control responsibilities and authorities
  • locations of safety data sheets (SDS) information and application
  • using confined space and Industry terminology

For more information or bookings – Phone Alan on 0488 999 670.

RIIWHS204D – Work Safely at Heights

Performance Evidence

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

  • locates and applies relevant documentation, policies and procedures
  • demonstrates completion of working safely at heights that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
    • accessing, interpreting and applying technical and safety information for working at heights
    • assessing hazards and risk associated with working at heights and implement control methods
    • selecting wearing and caring for personal protective equipment
    • identifying required safety systems including fall protection and associated equipment
    • checking that fitting, adjusting and anchoring of fall protection and associated equipment is correct
    • performing work safely at heights

Knowledge Evidence

The candidate must demonstrate knowledge of the following when working safely at heights:

  • names and functions of equipment, components and materials
  • complying with equipment manufacturer’s instructions and specifications
  • safe shifting and handling of tools and materials
  • adhering to statutory and regulatory authority requirements
  • the nature of work undertaken at heights
  • complying with heights safety systems
  • the processes of providing for safe working practices
  • using safety equipment/systems and considerations to facilitate working safely at heights
  • complying with safe work methods

For more information or bookings – Phone Alan on 0488 999 670.

TLILIC0012 – Licence to Operate a Vehicle Loading Crane…

Vehicle Loading Cranes play an important role on construction sites and in the manufacturing industry. The potential for serious injury and equipment damage as a consequence of incorrect operation are great so it is vital that employers ensure their operators receive proper training.

Course Objective:

On successful completion of this course applicants will be able to safely inspect and operate a Vehicle Loading Crane. Nationally recognised Worksafe Certification is issued on completion.

Course Outline:

  • Regulations
  • Duties of Employers
  • Duties of Employees
  • Duty of Care
  • Hazard Identification
  • Hazard Control Measures
  • Pre-Start Inspections
  • Log Book Documentation
  • Load Charts
  • Safe Operating Principles
  • Slinging Practices & Inspection
  • Mobilizing Loads
  • Crane Types
  • Hand & Whistle Signals
  • Signals

Delivery Method: Training consists of a combination of both theory & practical assessments

Course Pre-Requisites: Applicants must be 18 years of age.

For more information or bookings – Phone Alan on 0488 999 670.

TLILIC3006 – Licence to operate a non-slewing Mobile Crane…

Non Slewing Mobile Cranes play an important role on construction sites and in the manufacturing industry. The potential for serious injury and equipment damage as a consequence of incorrect operation are great so it is vital that employers ensure their operators receive proper training.

Course Objective:

On successful completion of this course applicants will be able to safely inspect and operate a Non Slewing Mobile Crane. Nationally recognised Worksafe Certification is issued on completion.

Course Outline:

  • Regulations
  • Duties of Employers
  • Duties of Employees
  • Duty of Care
  • Hazard Identification
  • Hazard Control Measures
  • Pre-Start Inspections
  • Log Book Documentation
  • Load Charts
  • Safe Operating Principles
  • Slinging Practices & Inspection
  • Mobilizing Loads
  • Crane Types
  • Hand & Whistle Signals
  • Signals

Delivery Method: Training consists of a combination of both theory & practical assessments

Course Pre-Requisites: Applicants must be 18 years of age.

For more information or bookings – Phone Alan on 0488 999 670.

TLILIC2002 – Licence to operate an Order Picking Forklift…

Order Picking Forklift Trucks are perhaps the most versatile machinery used in industry. Whilst most industrial workplaces have at least one order picking forklift truck, this is high risk equipment and operators need to be properly trained. A National Order Picking Forklift Truck Licence is valid Australia wide and for Order Picking Forklift Trucks of any capacity.

Course Objective:

On successful completion of this course applicants will be able to safely inspect & use an Order Picking Forklift Truck. Order Picking Forklift Trucks are the most commonly used machinery in industry today. National Worksafe Licence is issued upon successful completion.

Course Outline:

  • Regulations
  • Duties of Employers
  • Duties of Employees
  • Duty of Care
  • Hazard Control Measures
  • Hazard Identification
  • Pre-Start Inspections
  • Log Book Documentation
  • Load Centre Principles
  • Traffic/Pedestrian Control
  • Stability Triangle
  • Attachments
  • Safe Operating Principles

Delivery Method: Training consists of a combination of both theory & practical assessments

Course Pre-Requisites: Applicants must be 18 years of age. Pre-Study document will be supplied and must be completed prior to the course.

For more information or bookings – Phone Alan on 0488 999 670.

SUGPOBI3A – Operate a boiler – Intermediate

This is a Specialist unit. It covers the skills and knowledge required to for continuous and short term operation of an intermediate boiler and for start up and shut down after a prolonged break.

This unit is based on the boiler competency standards from the Worksafe Australia Standards for Users and Operators of Industrial Equipment NOHSC 1006 (2001). It should be selected where boiler operation is a certificated occupation.

For more information or bookings – Phone Alan on 0488 999 670.

SUGPOBB2A – Operate a boiler – Basic

This is a Specialist unit. It covers the skills and knowledge required to for continuous and short term operation of a basic boiler and for start up and shut down after a prolonged break.

This unit is based on the boiler competency standards from the Worksafe Australia Standards for Users and Operators of Industrial Equipment NOHSC 1006 (2001). It should be selected where boiler operation is a certificated occupation.

For more information or bookings – Phone Alan on 0488 999 670.